H3C Technologies H3C S10500 Series Switches User Manual

Page 222

211

[PE1] interface vlan-interface 20

[PE1-Vlan-interface20] ip address 10.1.1.1 24

[PE1-Vlan-interface20] mpls

[PE1-Vlan-interface20] mpls ldp

[PE1-Vlan-interface20] quit

# Configure OSPF on PE 1 for establishing LSPs.

[PE1] ospf

[PE1-ospf-1] area 0

[PE1-ospf-1-area-0.0.0.0] network 10.1.1.1 0.0.0.255

[PE1-ospf-1-area-0.0.0.0] network 192.2.2.2 0.0.0.0

[PE1-ospf-1-area-0.0.0.0] quit

[PE1-ospf-1] quit

# On the interface connected to CE 1, create a Martini MPLS L2VPN connection. The interface requires
no IP address.

[PE1] interface vlan-interface 10

[PE1-Vlan-interface10] mpls l2vc 192.3.3.3 101

[PE1-Vlan-interface10] quit

Configure the P device.

# Configure the LSR ID and enable MPLS globally.

system-view

[Sysname] sysname P

[P] interface loopback 0

[P-LoopBack0] ip address 192.4.4.4 32

[P-LoopBack0] quit

[P] mpls lsr-id 192.4.4.4

[P] mpls

# Enable LDP globally.

[P] mpls ldp

[P-mpls-ldp] quit

# Configure the interface connected with PE 1, and enable LDP on the interface.

[P] interface vlan-interface 20

[P-Vlan-interface20] ip address 10.1.1.2 24

[P-Vlan-interface20] mpls

[P-Vlan-interface20] mpls ldp

[P-Vlan-interface20] quit

# Configure the interface connected with PE 2, and enable LDP on the interface.

[P] interface vlan-interface 30

[P-Vlan-interface30] ip address 10.2.2.2 24

[P-Vlan-interface30] mpls

[P-Vlan-interface30] mpls ldp

[P-Vlan-interface30] quit

# Configure OSPF on the P device for establishing LSPs.

[P] ospf

[P-ospf-1] area 0

[P-ospf-1-area-0.0.0.0] network 10.1.1.2 0.0.0.255

[P-ospf-1-area-0.0.0.0] network 10.2.2.2 0.0.0.255