H3C Technologies H3C S10500 Series Switches User Manual

Page 219

208

[P-Vlan-interface20] quit

# Configure the interface connected with PE 2, and enable LDP on the interface.

[P] interface vlan-interface 30

[P-Vlan-interface30] ip address 10.2.2.2 24

[P-Vlan-interface30] mpls

[P-Vlan-interface30] mpls ldp

[P-Vlan-interface30] quit

# Configure OSPF on the P device for establishing LSPs.

[P] ospf

[P-ospf-1] area 0

[P-ospf-1-area-0.0.0.0] network 10.1.1.2 0.0.0.255

[P-ospf-1-area-0.0.0.0] network 10.2.2.2 0.0.0.255

[P-ospf-1-area-0.0.0.0] network 192.4.4.4 0.0.0.0

[P-ospf-1-area-0.0.0.0] quit

[P-ospf-1] quit

Configure PE 2.

# Configure the LSR ID and enable MPLS globally.

system-view

[Sysname] sysname PE2

[PE2] interface loopback 0

[PE2-LoopBack0] ip address 192.3.3.3 32

[PE2-LoopBack0] quit

[PE2] mpls lsr-id 192.3.3.3

[PE2] mpls

# Enable L2VPN and MPLS L2VPN.

[PE2] l2vpn

[PE2-l2vpn] mpls l2vpn

[PE2-l2vpn] quit

# Enable LDP globally.

[PE2] mpls ldp

[PE2-mpls-ldp] quit

# Configure the interface connected with the P device, and enable LDP on the interface.

[PE2] interface vlan-interface 30

[PE2-Vlan-interface30] ip address 10.2.2.1 24

[PE2-Vlan-interface30] mpls

[PE2-Vlan-interface30] mpls ldp

[PE2-Vlan-interface30] quit

# Configure OSPF on PE 2 for establishing LSPs.

[PE2] ospf

[PE2-ospf-1] area 0

[PE2-ospf-1-area-0.0.0.0] network 10.2.2.1 0.0.0.255

[PE2-ospf-1-area-0.0.0.0] network 192.3.3.3 0.0.0.0

[PE2-ospf-1-area-0.0.0.0] quit

[PE2-ospf-1] quit