Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 93)

System Installation
Centellis 4100 Installation and Use (6806800D82E) 95
 Shelf manager boards
 Any blades, or RTMs if present
Removing the System
To remove the system from a rack, proceed as follows:
1. Disconnect all cables from the PEMs and if applicable from the blades.
2. Loosen and remove the mounting screws.
3. Remove the system from the rack.
The system has to be powered down before the removal (see
Powering Down the System
on page 94 ).