Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 79)

Chapter 3
Centellis 4100 Installation and Use (6806800D82E) 81
System Installation
3.1 Overview
The following sections help you to start up and maintain the system:
3.2 Before Installation
This section provides the following information:
 Type label location
 Requirements
 Tools you will need
3.2.1 Type Label Location
The serial number label for the shelf is located at the lower part on the right hand side of the
chassis.
3.2.2 Requirements
Please ensure that the requirements outlined in section
Requirements
on page 67 are met.
The power input cables must have a minimum cross section of 10 mm 2 , AWG 6.
Step Description
Before installation This section provides information about the requirements,
unpacking and inspecting the delivery and the type label
location.
Installation This section provides information about how to mount the
system into a rack and how to ground the system.
Removal This section provides information on how to power down the
system and remove it from a rack.