2 ground system/bonding, Figure 3-1, Rack mounting dimensions – Artesyn Centellis 4100 Installation and Use (2015) User Manual
Page 85
System Installation
Centellis 4100 Installation and Use (6806800D82E)
87
You have to keep the following conditions when installing the system into an at least 600 mm
(23.62 inch) deep rack. The physical dimensions in the figure below are in millimeters. Please
ensure that 60% of the rack's rear is open.
3.3.2
Ground System/Bonding
The following section provides information needed to ground the system.
Figure 3-1
Rack Mounting Dimensions
This manual is related to the following products:
- AXP640 Installation and Use (April 2015) AXP1620 Installation and Use (August 2014) AXP1620 Installation and Use (September 2014) Centellis-4440/AXP-1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (July 2014) AXP1620 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (September 2014) AXP640 Installation and Use (May 2014)