Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 141)

FRU Installation
Centellis 4100 Installation and Use (6806800D82E) 143
Exchanging a Blower
During blower exchange, it is not necessary to set the handle switch. If you want to inform the
shelf management software of blower extraction and insertion, you can set the handle switch.
If not, you can leave the handle switch set to the Closed position during the whole exchange
procedure.
1. Remove the replacement blower from the shipping box and make sure that it is the
correct model for the shelf (see
Ordering Information
on page 63 ).
2. Pull the clips on the left and right-hand side of the cover up.