Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 104)

FRU Installation
Centellis 4100 Installation and Use (6806800D82E) 106
Refer to section
Blade Insertion and Extraction
on page 204 to read about the steps that are
carried out by the software after blade insertion and before blade extraction.
4.2.2.1 Installing the Node Blade
To install the blade into an AdvancedTCA shelf, proceed as follows.
Damage of Circuits
Electrostatic discharge and incorrect blade installation and removal can damage circuits or
shorten their life.
Before touching the blade or electronic components, make sure that you are working in an
ESD-safe environment.
Blade Malfunctioning
Incorrect blade installation and removal can result in blade malfunctioning.
When plugging the blade in or removing it, do not press on the face plate but use the
handles.