Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 72)

Site Preparation
Centellis 4100 Installation and Use (6806800D82E) 74
2.2.5 Mounting Options
You can simply operate the system on your desk or you can install it in a standard 19" rack.
ATCA-M100 20 x 102 x 117 0,13
ATCA-F120 30 x 351 x 312 2,30
RTM-ATCA-F120 28.95 X 351 X 89 0,70
ATCA-7221 30 x 351 x 312 3,20
Table 2-4 Dimensions and Weight of System and Components (continued)
Component
Dimensions
w x h x d in mm
Weight in kg
Personal Injury or System Damage
The system is heavy and if you carry it on your own you can hurt your back.
To prevent injury, keep your back straight and have two people lift the system or use
additional lifting equipment.
Personal or System Damage
Unstable system installation in a rack can cause the rack to topple over.
Therefore, if your system is the only one in the rack, make sure to mount the system in the
lowest part of the rack. If other systems are installed in one rack, start with the heaviest
component at the bottom.
If the rack is equipped with stabilizing devices, make sure that they are installed and
extended so that the rack is secure. Then proceed to mount or service the system.