Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 83)

System Installation
Centellis 4100 Installation and Use (6806800D82E) 85
Personal or System Damage
The system is heavy and if you carry it on your own you can hurt your back. To prevent injury,
keep your back straight and have two people to lift the system or use additional lifting
equipment.
Personal or System Damage
Unstable system installation in a rack can cause the rack to topple over.
Therefore, if your system is the only one in the rack, make sure to mount the system in the
lowest part of the rack. If other systems are installed in one rack, start with the heaviest
component at the bottom.
If the rack is equipped with stabilizing devices, make sure that they are installed and
extended so that the rack is secure. Then proceed to mount or service the system.
System Damage
During the course of handling, shipping, and assembly, pins, shrouds and mounting
screws, blowers and other items can become loose or damaged.
Do not operate a damaged shelf, this can cause damage to devices that interfere with it.
Grounding
To ensure the system is properly grounded, each of the system's parts contact the EMI
gasket. The system contains gaskets at the shelf and module level.
The shelf is also fitted with ESD contacts. Please take care for proper ESD protection of the
operator.