Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 180)

Configuring and Operating the System
Centellis 4100 Installation and Use (6806800D82E) 182
6.4 Software
System components are delivered with the software installed.
DHCP server
configuration Backplane ethernet
connections from other
blades 192.168.21.1 or 192.168.22.1 in slot 1
192.168.21.2 or 192.168.22.2 in slot 2
Out-of-band interface on
ATCA-F120 No default setting, IP address as defined by
customer in uboot
Table 6-5 Access to System Components
(continued)
Component To Be
Configured and Accessed
Access Via Default IP Address
Table 6-6 Software Available on System Components
Component Software
AMC module Basic Blade Services Software including:

Operating System
 Hardware management functions
 Set of management routines for Linux and all hardware
interfaces
ATCA-A100 IPMI firmware
ATCA-F120 Basic Blade Services Software including:

Operating System
 Hardware management functions
 Set of management routines for Linux and all hardware
interfaces
IPMC firmware images of other blades in the system
Network boot images of all other blades in the system
ATCA-M100 IPMC firmware
Boot loader (Uboot)
Linux kernel
Initial ram disk
Blower IPMI firmware