Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 176)

Configuring and Operating the System
Centellis 4100 Installation and Use (6806800D82E) 178
If no ATCA-A100 board is present in the shelf, the default Shelf IP Connectivity Record #1 is as
follows:
Changing the Shelf Manger Virtual IP Address for the Out-Of-Band Interface
To change this IP address, you need to modify the first two octets of the Shelf IP Connectivity
Record #1 and/or change the shelf address. Refer to
Setting the Shelf Address
on page 171 to
see how you can change the shelf address. This procedure describes how to change the first
two octets of the IP address.
1. Change the first two octets of the IP address using the hpiship tool located on the
shelf manager. Use the option -h for help.
2. Reboot the system for the changes to take effect.
Example #1:
Print current IP address settings and change out-of-band address:
*Print current IP address settings
shm9s8:~ # hpiship
29 {ADVANCEDTCA_CHASSIS,9} Shelf Resource
4097 Shelf Manager IP Address 0
IP : 192.168.9.171
Gateway: 192.168.9.0
Submask: 255.255.255.0
8449 Shelf Manager IP Address 1
Table 6-3 Shelf IP Connectivity Record #1
Shelf IP Connectivity Record #1
IP Address 192.168.0.171
Default Gateway 192.168.0.170
Network Mask 255.255.255.0