Artesyn Centellis 4100 Installation and Use (2015) User Manual

Page 128

FRU Installation

Centellis 4100 Installation and Use (6806800D82E)

130

11.Once the new PEM is installed and connected, turn on the feed power.

12.If the red LED is ON, the PEM indicates reverse power. Go back to step 8 and

connect the power cables correctly.

PEM Damage
Applying reversal power causes damage to the electrolytic capacitors of the filter.
Therefore, only switch on the breakers if no red light is visible.

This manual is related to the following products:

AXP640 Installation and Use (April 2015) AXP1620 Installation and Use (August 2014) AXP1620 Installation and Use (September 2014) Centellis-4440/AXP-1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (July 2014) AXP1620 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (September 2014) AXP640 Installation and Use (May 2014)