Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 80)

System Installation
Centellis 4100 Installation and Use (6806800D82E) 82
3.2.3 Tools You Will Need
Before you start the installation, make sure that you have all the necessary equipment at hand.
3.3 Installation
This section provides the information and instructions needed to mount a system in a rack.
Usage Equipment
General Philipps head screwdriver #1 and #2
Wrenches (7, 8, 10 mm or 0.28, 0.31, 0.39 inch)
Crescent wrench
Socket wrench
Large and small socket screwdriver
Large, medium and small Philipps screwdrivers
Antistatic mat
ESD wrist strap
Shelf Transport equipment: Hand truck or forklift/pallet truck
Lifting equipment for installation
PEM Cable from Thomas&Betts P/N 256-30695-1225 or equivalent cables
System Access Crossover cable
Twisted pair Ethernet cable