Table 6-7, Available software upgrade tools, Configuring and operating the system – Artesyn Centellis 4100 Installation and Use (2015) User Manual
Page 182
Configuring and Operating the System
Centellis 4100 Installation and Use (6806800D82E)
184
The following table shows which tools you can use and where you can find a description of how
to do it.
Artesyn Embedded Technologies - Embedded Computing recommends to always use
FUMI if available.
Table 6-7 Available Software Upgrade Tools
Procedure
Tool
Document/Chapter
AMC module firmware upgrade
FCU
Basic Blade Services Programmer’s Guide of the
respective module
Chapter: Firmware Upgrade Facility
ATCA-A100 firmware upgrade
FUMI
System Management Interface Based on HPI-B (Centellis
31kX /4100) User’s Guide
Chapter: Using the Firmware Update Management
Instrument
fw_tool
ATCA-M100 Installation and Use
Chapter: Software Upgrade
ATCA-F120 firmware upgrade
FCU
Basic Blade Services Software on ATCA-F120 Programmer’s
Reference
Chapter: Firmware Upgrade Facility
fw_tool
ATCA-M100 Installation and Use
Chapter: Software Upgrade
ATCA-M100 firmware upgrade
FUMI
System Management Interface Based on HPI-B (Centellis
31kX /4100) User’s Guide
Chapter: Using the Firmware Update Management
Instrument
fw_tool
ATCA-M100 Installation and Use
Chapter: Software Upgrade
- AXP640 Installation and Use (April 2015) AXP1620 Installation and Use (August 2014) AXP1620 Installation and Use (September 2014) Centellis-4440/AXP-1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (July 2014) AXP1620 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (August 2014) Centellis-4440/AXP-1440 Installation and Use (May 2014) Centellis-4440/AXP1440 Installation and Use (September 2014) AXP640 Installation and Use (May 2014)