Artesyn Centellis 4100 Installation and Use (2015) - Manual (Page 174)

Configuring and Operating the System
Centellis 4100 Installation and Use (6806800D82E) 176
The backplane interface IP address of the shelf manager depends on the Shelf IP Connectivity
Record #2. The default is as follows:
Changing the Virtual Shelf Manger IP Address for the Backplane Interface
To change this IP address, you need to modify the first three octets of the Shelf IP Connectivity
Record #1.
1. Change the first two octets of the IP address using the hpiship tool located on the
shelf manager. Use the option -h for help.
2. Reboot the system for the changes to take effect.
Example:
Print current IP address settings and change out-of-band address:
*Print current IP address settings
shm9s8:~ # hpiship
29 {ADVANCEDTCA_CHASSIS,9} Shelf Resource
4097 Shelf Manager IP Address 0
IP : 192.168.9.171
Gateway: 192.168.9.0
Submask: 255.255.255.0
8449 Shelf Manager IP Address 1
IP : 172.16.9.171
Table 6-2 Shelf IP Connectivity Record #2
Shelf IP Connectivity Record #2
IP Address 192.168.20.171
Default Gateway 192.168.20.170
Network Mask 255.255.255.0