beautypg.com

Refer to, Move the common mode jumper to the disconnected – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size User Manual

Page 95

background image

Frame 10 Installation

7-11

Move the Common Mode Jumper to the Disconnected Position

Follow the lettered steps below to move the common mode jumper to the
disconnected position (refer to

Figure 7.6

for jumper location):

Task

Description
Loosen the upper screw.

Remove the lower screw.

Move the jumper to the horizontal position.

Install and tighten the screws.

A

B

C

D

A

B

C

D

Rectifier Circuit Board

Front View of
Power Structure

This manual is related to the following products: