Dimensions, Dimensions -3 – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size User Manual
Page 87
Frame 10 Installation
7-3
Dimensions
Figure 7.3 Enclosure Code A (NEMA/UL Type 1, IP21) and M (NEMA/UL Type 1, IP21
w/Conformal Coat)
2275.0
(89.57)
2201.8
(86.68)
606.0
(23.85)
534.7
(21.05)
2234.0
(87.95)
32.3
(1.27)
42.0
(1.65)
498.0
(19.61)
605.5
(23.84)
632.5*
(24.90)
Lifting Holes
116 (4.5)
Gap with
Overlapping
Plate Removed
57.2
(2.3)
Standard
73.3 (2.9)
Max.
144.5
(5.7)
439
(17.3)
83 (3.3)
Dimensions are in millimeters and (inches).
* This dimension is the depth for drives with
the optional door-mounted HIM installed.
Wire entry for this enclosure is between two pieces of soft foam. If the adjustable plate is slid back, a gap
develops between the foam pieces. Otherwise, the foam acts as a loose gasket around the wires.
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate