Lifting frame – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size User Manual
Page 199
Lifting and Mounting Instructions
B-3
Lifting Frame 10-14 Size Drives
When lifting frame 10-14 size drives you must:
• attach the lifting hardware.
• remove the skid and shipping feet.
Step 1: Attaching the Lifting Hardware to the Drive
Important: AC Input frame 14 drives are shipped as multiple enclosure
sections that must be lifted separately and then connected after
they have been properly mounted.
Figure B.2 Frame 14 Shipping Sections
!
ATTENTION: Do Not lift frame 14 drive enclosure sections
after they have been connected as one unit. Lifting connected
frame 14 drive enclosure sections as one unit may result in a
hazardous condition that could cause personal injury and/or
equipment damage.
DC Input Drive -
Lift as one unit.
AC Input Drive, 1500A - 2 sections shipped.
Lift each enclosure section separately.
AC Input Drive, > 1500A - 2 sections shipped.
Lift each enclosure section separately.