Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size - Manual (Page 153)

Frame 14 Installation 11-7
Figure 11.5 DC Input Drive Enclosure Code A (NEMA/UL Type 1, IP 21) and M (NEMA/
UL Type 1, IP21 w/Conformal Coat)
22 3 2
( 88 )
601
(2 3 .7)
620
(24.5)
44
(1.7)
2270
( 8 9.4)
1597
(6 3 .0)
675
(26.6)
125 (5.0) 62.25
(2.5)
475
(1 8 .7)
65
(2.6)
3 0 (1.2)
6 8 .75 (2.7)
799.5 ( 3 1.5)
675
(26.6)
Dimensions are in millimeters and (inches).
Wire entry for this enclosure is between two pieces of
soft foam. If the adjustable plate is slid back, a gap
develops between the foam pieces. Otherwise, the
foam acts as a loose gasket around the wires.
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate