Lifting and mounting frame 9 drives, Removing the protective covers – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size User Manual
Page 80
6-4
Frame 9 Installation
Lifting and Mounting Frame
9 Drives
Refer to Appendix B -
Lifting and Mounting Instructions
for detailed
instructions.
Removing the Protective
Covers
Ungrounded, Unbalanced or
High Resistive Ground
Installations
CE frame 9 drives are equipped with common mode capacitors that are
referenced to ground. Operating a CE frame 9 drive on a resistive ground or
ungrounded distribution system could result in drive damage.
(8 Screws)
L1
L2
L3
L1
L2
L3
U/T1 V/T2 W/T3 U/T1 V/T2 W/T3
L1
L2
L3
L1
L2
L3
U/T1 V/T2 W/T3 U/T1 V/T2 W/T3
(8 Screws)
Removing the Connection
Cover
Removing the Power
Cover
L1
L2
L3
L1
L2
L3
U/T1 V/T2 W/T3 U/T1 V/T2 W/T3
(3 Screws)
Removing the Conduit
Cover
!
ATTENTION: If you intend to operate a Frame 9 drive on a
resistive ground or ungrounded distribution system, you must
order a non-CE PowerFlex drive.