Rockwell Automation 999 IMC S Class Compact Motion Controller (Cat. No. 4100-999-122) - Manual (Page 180)

A-2 Cable Information
Publication 999-122 - January 1997
The currently available cable assemblies are shown in the table below.
Each of these cable assemblies is fully described following.
4100-CCF1 or 4100-CCF3
The 4100-CCF1 is a 1 foot (0.3 meter) long cable assembly for
connecting the IMC S Class to Flex I/O. The 4100-CCF3 is a 3 foot (1
meter) long cable assembly for connecting the IMC S Class to Flex I/O.
Both cables come pre-terminated at both ends with the appropriate
connectors for the S Class Compact and Flex I/O. You only need one
cable assembly (either a 4100-CCF1 or a 4100-CCF3) for each IMC S
Class Compact that uses Flex I/O.
4100-CCS15F
The 4100-CCS15F is a 15 foot (4.5 meter) long cable assembly with
flying leads which connects the IMC S Class Compact to a single axis
of encoder feedback and servo drive command. Each 4100-CCS15F
cable assembly provides connections for one axis-use multiple cable
assemblies for multiple axes.
A schematic of the 4100-CCS15F cable assembly is shown below.
IMC-S/23x Pre-Engineered Cable Assemblies
Catalog
Number
Used for... Length
4100-CCF1 or
4100-CCF3
4100-CCS15F
4100-CCA15F
4100-CCW15F
4100-RCS3T Flex I/O
Flex I/O
Servo and Feedback
Axis I/O
CPU Watchdog
REC Interface 1 foot (0.3 m)
3 feet (1 m)
15 feet (4.5 m)
15 feet (4.5 m)
15 feet (4.5 m)
3 feet (1 m)
4100-CCAQB Single Axis Connection to
Allen-Bradley 1391 -