Rockwell Automation 999 IMC S Class Compact Motion Controller (Cat. No. 4100-999-122) - Manual (Page 12)

P-2 Preface
Publication 999-122 - January 1997
Contents of this Manual
!
ATTENTION: An incorrectly applied or installed
Compact can result in component damage or a reduction
in product life. Wiring or application errors, such as
undersizing the motor, incorrect or inadequate AC supply,
or excessive ambient temperatures can result in
malfunction of the product.
ATTENTION: This product contains ESD
(Electrostatic Discharge) sensitive parts and
assemblies. Static control precautions are required
when installing, testing, servicing, or repairing this
assembly. Component damage can result if ESD
control procedures are not followed. If you are not
familiar with static control procedures, refer to
Allen-Bradley publication 8000-4.5.2, Guarding
Against Electrostatic Damage or any other applicable
ESD Protection Handbook.
Chapter Title Contents
Preface
Describes the purpose, background, and scope
of this manual. Also specifies the audience for
whom this manual is intended.
1 Safety Lists safety information regarding the Compact.
2 Introduction Provides a feature overview of the Compact.
3 Technical Overview Provides a technical overview of the Compact.
4
Installation and
Hookup Provides information that allows you to install and
hook up your Compact.
5
Understanding the
IMC-S23x Setup
Provides information that allows you to
understand the setup procedures for the
Compact.
6
Setting Up your
Compact
Provides setup procedures for the Compact.
7 Troubleshooting
Explains how to interpret and correct problems
with your Compact.
Appendix A Cable Information
Provides information about the cables used with
the Compact.