MacDon M205 Operators Manual - Manual (Page 357)

MAINTENANCE AND SERVICING
6. Blow debris out of ducts (A) with compressed air.
7. Clean screen with compressed air.
Figure 5.114: Engine Cooling System
8. Move the screen cleaner assembly (C) back into
position and secure with bolts and nuts (B).
9. Ensure ducts (A) have the proper screen clearance,
refer to Adjusting Screen Cleaner Duct to Screen
Clearance, page 344 .
10. Close the cooler box screen, refer to Closing Cooler
Box Screen, page 344 .
11. Close the hood, refer to 5.4.4 Closing Hood (Highest
Position), page 290 .
Figure 5.115: Engine Cooling System
Cleaning Cooler Box Components
The radiator and oil cooler should be cleaned daily with compressed air. More frequent cleaning may be necessary
in severe conditions. The charge air cooler and air conditioning condenser may also be cleaned at the same time.
To clean these components, proceed as follows:
1. Open cooler box screen, refer to Opening Cooler Box
Screen, page 339 .
169887 341 Revision A