Checking coolant level, Danger – MacDon M205 Operators Manual User Manual
Page 351
1. Open the hood, refer to
.
2. Open the platform. Refer to
3. Remove the radiator cap (A).
IMPORTANT:
Turn the cap (A) counterclockwise to the first notch to
relieve pressure before removing cap completely.
4. Check the coolant in the radiator using an antifreeze
tester.
Tester should indicate protection to
temperatures of -30°F (-34°C).
5. Inspect the radiator cap before reinstalling, refer to
Inspecting Radiator Cap, page 334
6. Replace radiator cap (A).
7. Close the platform, refer to
8. Close the hood, refer to
.
Figure 5.103: Engine Cooling System
Checking Coolant Level
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Check coolant level in the coolant recovery tank (A) daily.
1. Stop the engine and remove the key.
2. Open the hood, refer to
.
3. Open the platform, refer to
NOTE:
To view coolant capacities, refer to
Fluids, and System Capacities, page 285
.
4. Close the platform, refer to
5. Close the hood, refer to
.
Figure 5.104: Engine Cooling System
169887
335
Revision A