beautypg.com

Setting draper minimum speed, Caution – MacDon M205 Operators Manual User Manual

Page 269

background image

OPERATION

Setting Draper Minimum Speed

Figure 4.220: Operator Console

CAUTION

Check to be sure all bystanders have cleared the area.

Set draper minimum speed as follows:

IMPORTANT:
Set the minimum draper speed while stationary with the ground speed lever (GSL) in the N-DETENT position.

1. Engage header.

2. Set HEADER INDEX (B) switch to ON.

3. Press DISPLAY SELECTOR button (E) until display (A) shows ##.## DRAPER MIN.

The displayed value (##.##) = draper speed (mph or km/h

15

).

4. Use the FAST (C) and SLOW (D) buttons to set the desired minimum draper speed.

15.

Depending on cab display module (CDM) programming.

169887

253

Revision A

See also other documents in the category MacDon Gardening equipment: