Avaya P580 - Manual (Page 73)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 2-15
Initialize and Setup
4. Select which features that you want this access type to
support from the Accessible Features list.
5. Select Apply to save the Access Type or Cancel to ignore the
Access Type.
Creating
Custom Access
Types with the
CLI
To create a Custom Access Type using the CLI, enter the following
command in Configuration mode:
# custom-access-type [sys-
configuration] [module-port-mgmt] [events-mgmt
] [l2-switching] [routing]
Modifying a Custom Access Type
To modify a Custom Access Type:
1. Open the Custom Access Types web screen (refer to the
"Opening the Custom Access Types Web Page" section earlier
in this section).
2. Select an access type name from the Type Name field.
3. Select Modify from the Custom Access Types web
screen. The Modify Custom Access Type web screen
displays with the name of the access type you want to modify
displayed in the Type Name field (Figure 2-9).