Avaya P580 - Manual (Page 568)

16-26 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Configuring the LGMP Server
You can configure the LGMP server using either the Web Agent or
the CLI.
Using the Web
Agent
To configure the LGMP server using the Web Agent:
1. Select LGMP Server from the L2 > Intelligent Multicast
group on the Web Agent window. The LGMP Server
Configuration dialog box opens (Figure 16-12).
* Note: You must enable intelligent multicasting on a
global basis to activate the LGMP Server. LGMP
serving is only active on VLANs with an IGMP
interface enabled and IGMP snooping globally
enabled.
2. Refer to Table 6-103 to configure the LGMP Server
Configuration dialog box parameters.
LGMP Message
Transmission
Statistics • Report - Displays the number of LGMP
report messages transmitted.
• Leave - Displays the number of LGMP leave
messages transmitted.
• End Session - Displays the number of
LGMP end session messages transmitted.
• Router Report - Displays the number of
LGMP router report messages transmitted.
• Router Leave - Displays the number of
LGMP router leave messages transmitted.
Intelligent
Multicast Session
Statistics • Client Ports Added- Displays the number
of add client events generated by LGMP.
• Client Ports Removed - Displays the
number of remove client events generated
by LGMP.
• Sessions Removed- Displays the number
of remove session events generated by
LGMP.
• Router Ports Added- Displays the number
of add router events generated by LGMP.
• Router Ports Removed- Displays the
number of remove router events generated
by LGMP.
Parameter Definition