Using the cli – Avaya P580 User Manual

Page 404

Text mode
Original mode

9-118

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

Chapter

Using the CLI

To configure the PPP console after you have made all the applicable
cable connections with an IP address using the CLI, enter the
following command in Interface mode:

(config if )# ip VLAN {

id>|name | Ethernet-Console|Serial-

Console}

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.

This manual is related to the following products:

P550R