Avaya P580 - Manual (Page 558)

16-16 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Figure 6-151. Static Multicast Session Configuration Dialog Box
3. Configure the Static Multicast Session Configuration
dialog box parameters (refer to Table 6-100):
4. Click APPLY to create the new static multicast session, or
CANCEL to restore previous settings.
Table 6-100. Static Multicast Session Configuration Dialog Box
Parameters
Parameter Definition
IP Address Enter the IP address of the new static multicast
session. The range must be between 224.0.1.0 to
239.255.255.255.
MAC Address Enter the MAC address of the new static multicast
session. Specifying the MAC address is not used for an
IP multicast session.
VLAN Enter the VLAN associated with the new multicast
session. Click All to add all VLANs to the multicast
session, or select a specific VLAN from the pull-down
menu.