Avaya P580 - Manual (Page 368)

9-82 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
3. Refer to Table 6-33 for an explanation of the DVMRP
Interface Statistics dialog box parameters:
Table 6-33. DVMRP Interface Statistics Parameters
Parameter Defines the...
DVMRP Interface IP interface configured with the DVMRP multicast
routing protocol.
Network Address IP address of the interface configured with the DVMRP
multicast.
Address Mask IP subnet mask associated with the interface.
State Current status of the interface. Possible status indications
include:
• UP - The interface is active.
• DOWN - The interface is inactive.
Type Type of interface configured. Possible values include:
• Broadcast - All traffic is forwarded through the
routers. This is not a tunnel and does not require
encapsulation.
• IPIP Tunnel - All multicast traffic (data and
protocol messages) on this interface is encapsulated
in IP unicast packets with the protocol set to IPIP (IP
in IP).
• Non-Encapsulated Tunnel - All multicast data
traffic on this interface is IPIP encapsulated, but the
protocol messages are simple unicast.
Metric Interface cost.
IGMP Querier on Interface Router is the IGMP querier. The purpose of the IGMP
querier is to periodically poll hosts on your network to
trigger group membership reports.
Next Probe Message in (sec) Time (in seconds) remaining until the next probe
message is sent.
Unrecognized Packets
Received Number of unknown DVMRP messages.
Invalid Routes Received Number of invalid routes received on this interface.
Neighbor DVMRP Router(s) Number of (neighbor) routers that are also running
DVMRP.
Note: This number is a hypertext link that provides
additional information on the DVMRP neighbor
router(s).