Avaya P580 - Manual (Page 301)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 9-15
Configuring IP Routing
192.168.10.x to communicate with computing resources on
network 192.168.60.x without having to go through a router. To
create a multinetted network, you must assign multiple subnets to a
VLAN.
* Note: Only one subnet can be BootP/DHCP Gateway. The
second subnet must use Static IP addresses.
Figure 6-29. Multinet Diagram
Creating a
Multinet
Interface
To create a multinet interface:
1. Select Interfaces from the Routing > IP > Configuration
group on the Web Agent window. The IP Interfaces dialog
box opens (Figure 6-26).
2. Select CREATE. The Add IP Interface dialog box opens
(seeFigure ).
3. Enter a name for the interface in the Interface field.
4. Select a VLAN for this multinet interface from the VLAN
field pull-down menu.
5. Enter the network address associated with this interface in
the Network Address field.
6. Select CREATE from the bottom of the Add IP Address
dialog box. The IP Interfaces dialog box re-opens with the
new interface name listed in the Interface field.
7. Repeat steps 2 through 6 for any other interfaces that you
want to associate with the same VLAN.
Avaya
192.168.10.0
PC
PC
VLAN-A
Ethernet
segment
Server Ports
192.168.60.0
Multiservice
Switch