Avaya P580 - Manual (Page 354)

9-68 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Displaying
Global IP
Routing
Statistics Using
the CLI
To display the global IP routing statistics using the CLI, enter the
following command from the enable mode or configuration mode
prompt:
># show ip traffic
Searching the IP
Routing Table
To use the IP routing table:
1. Select Route Table Search from the Routing > IP >
Display group on the Web Agent window. The IP Route
Table Search dialog box opens (Figure 6-46).
Figure 6-46. IP Route Table Search Dialog Box
IP Multicast In Receives Total number of input multicast datagrams
received from interfaces, including those
received in error.
BOOTP/DHCP In
Requests Number of requests received by the BOOTP/
DHCP Relay Agent.
BOOTP/DHCP In
Responses Total number of BOOTP/DHCP response
datagrams received by the BOOTP/DHCP Relay
Agent.
BOOTP/DHCP In
Discards Number of BOOTP/DHCP requests
discarded.Incremented when an IP interface
receives a DHCP/BootP request, but the IP
interface does not have the BooTP/DHCP Relay
Gateway Enabled.
BOOTP/DHCP In Hops
Exceeds Number of BOOTP/DHCP requests not
forwarded due to number of hops exceeds.
BOOTP/DHCP Out
Requests Total number of BOOTP/DHCP requests
forwarded by the BOOTP/DHCP Relay Agent.
BOOTP/DHCP Out
Responses Total number of BOOTP/DHCP responses
forwarded by the BOOTP/DHCP Relay Agent.
Table 6-24. IP Routing Global Statistics continued
Statistic Defines the...