Avaya P580 - Manual (Page 480)

12-24 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
3. Refer to Table 6-73 to determine the search parameters:
4. Click on the SEARCH to start the search.
— If available services are found they are displayed in IPX
Service Table dialog box.
— If services are not available, a message displays in the IPX
Service Table dialog box.
Displaying the IPX Service Table
To display the IPX service table:
1. Perform an IPX Service table search as described in
"Searching the IPX Service Table", earlier in this chapter. If
available services are found they are displayed in the IPX
Service Table dialog box.
Table 6-73. IPX Service Table Search Parameters
Parameter Allows you to ...
Source Search the IPX Service Table using one of the following
parameters:
• SAP - Services learned via the SAP protocol
• Static - User configuration
• Local - Local services
Once you select a parameter, you can search to find the
routes associated with that parameter.
Interface Search the IPX Service Table using the interface associated
with the next-hop to the service.
Service Name Search the IPX Service Table using a service name you
specify. Note that you can specify a single asterisk (*) to
indicate a wildcard character that will match all characters
entered before the wildcard. For example, entering
FS_ENG* will find all service names that start with FS_ENG.
Service Type Search the IPX Service Table using the service type you
specify. For example, to specify a print queue type, you
would enter 3 (0003h) in the space provided.