Enabling nedr, Enabling nedr -42 – Avaya P580 User Manual
Page 222
5-42
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
Enabling NEDR
You can enable NEDR only on Gigabit Ethernet ports and only by
using CLI commands.
To enable NEDR:
1. Enter Global Configuration mode.
The CLI displays the
prompt.
* Note: For information on how to enter this mode, see
“Accessing/Exiting the Command Modes” in
Chapter 1, “Overview,” of Command Reference
Guide for the Avaya P550R, P580, P880, and P882
Multiservice Switches, Version 5.3.
2. Enter the following command:
[rising-threshold
threshold
Table 6-2 explains the keywords, arguments, and options for the set
port network-error-detection command:.
Table 6-2. set port network-error-detection Keywords,
Arguments, and Options
Keywords,
Arguments and
Options
Explanation
The slot number of the module, and, either
port number, or range of port numbers.
Enter the port ranges in the format
Px
-
Py
.
For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
all
Disables NEDR on all ports on all modules in
the switch. all can be used only with off.
1 of 2