Creating a bootp/dhcp server entry, Creating a bootp/dhcp server entry -46, Creating ip static arp entries using the cli – Avaya P580 User Manual
Page 332
9-46
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
3. Refer to Table 6-20 to configure the Add IP Static ARP
Entry dialog box parameters:
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Creating IP
Static ARP
Entries Using
the CLI
To create IP static ARP entries using the CLI, enter the following
command in Configure mode:
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Creating a BOOTP/DHCP Server Entry
The BOOTP/DHCP Server Entry allows you to configure a Router as
a BOOTP/DHCP Relay Agent between a BOOTP/DHCP server and
the requesting client.
You can create a BOOTP/DHCP Server entry using either the Web
Agent or the CLI.
* Note: BootP/DHCP must first be enabled in the IP Global
Configuration.
Table 6-20. IP Static ARP Parameters
Parameter
Allows you to...
IP Address
Enter an IP address to associate with the Static ARP
entry.
MAC Address
Enter the MAC address of a node to which you want to
create a static ARP entry.