Modifying ipx static service, Monitoring your switch using ipx, Modifying ipx static service -17 – Avaya P580 User Manual
Page 473: Monitoring your switch using ipx -17, Web agent procedure, Cli command
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
12-17
Configuring IPX Routing
Modifying IPX Static Service
You can modify an IPX static service using either the Web Agent or
the CLI.
Web Agent
Procedure
To modify an IPX static service using the Web Agent:
1. Select Static Services from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Services dialog box opens (see Figure 6-100).
2. Select the checkbox for the IPX Static Service that you want
to modify from the Select column.
3. Refer to Table 6-68 to modify the IPX Static Services dialog
box parameters.
CLI Command
To modify an IPX static service using the CLI, enter the following
command in Configure mode:
name> node> Refer to the Command Reference Guide for the Avaya P550R, P580, P880, Monitoring Your Switch Using IPX This section explains how to use IPX to do the following on your ■ Displaying IPX Global Statistics ■ ■ Displaying the IPX Route Table ■ Displaying IPX Route Table Statistics ■ Searching the IPX Service Table ■ Displaying the IPX Service Table ■
and P882 Multiservice Switches, Version 5.3 for details about this
command.
switch: