Avaya P580 - Manual (Page 126)

3-14 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3
Chapter 3
1. Select Power System from the System>Configuration
group on the Web Agent window. The Power System
dialog box opens with your switch’s current power statistics
(Figure 3-8).
Figure 3-8. Power System Window
2. Refer to Table 3-3 and review the Power System dialog box
parameters:
* Note: You will see 1400W of available power displayed in the
Total System Power field if you have three power
supplies installed. The switch only uses power from two
of the three power supplies. The third power supply is a
redundant power supply and is used only if one of the
other power supplies fails.
CLI Command
To display your switch’s power system statistics using the CLI, enter
the following command from the User mode:
Table 3-3. Power System Dialog Box Parameters
Parameter Definition
Power Supply Identifies the power supply
Status indicates whether the power supply is
detected.
Type Describes the type of power supply
detected.
Total System Power Displays the total system power in Watts.
Current Power Available Displays the current power available.