Avaya P580 User Manual
Page 148
4-18
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Chapter 4
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
4. Select a VLAN name from the Bridge column (Figure 4-9)to
set the bridge parameters. The Spanning Tree Bridge
Configuration dialog box opens (Figure 4-10).
Figure 4-8. Spanning Tree Bridge Configuration Dialog Box
Status
Indicates whether a bridge is enabled or disabled
Bridge ID
This bridge’s ID
Bridge Ports
The number of ports in this bridge
Designated
Root
Displays the Root bridge for this spanning tree
Root Port
Bridge port used to access the root bridge
Root Cost
Path cost to the root bridge
Topology
Changes
Number of topology changes that have occurred since the last system
reset
Time Since
Topology
Change
(hh:mm:ss)
Number of hours, minutes, and seconds since the last topology change
Table 4-3. Spanning Tree Information Configuration Field Options
Parameter
Definition