Avaya P580 - Manual (Page 398)

9-112 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI
To configure LDAP settings on a primary and secondary server from
the CLI, enter the following command from configuration mode:
To Change the LDAP search base, use the following CLI command.
# ldap search-base
To change the primary LDAP server's primary ip address and port,
use the following CLI command.
# ldap server primary [
num>]
To change the secondary LDAP server's primary ip address and port,
use the following CLI command.
# ldap server secondary
[]
To configure policy retrieval to stop on the first error, or ignore
errors, use the following CLI command.
# ldap execution-option {stop-on-error
| ignore-errors}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.