Avaya P580 - Manual (Page 587)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 17-7
Monitoring the Avaya Multiservice Switch
Configuring the Protocol Event Log
You can use the protocol event log to enable RIP and OSPF packet
tracing for layer 3 only. RIP requests and responses received and
sent through all RIP interfaces are logged to the event log as protocol
events. OSPF packet types received and sent through all OSPF
interfaces are logged to the event log as protocol events. AppleTalk
packet types received and sent through all AppleTalk interfaces are
logged to the event log as protocol events. LDAP packet types
received and sent through all LDAP interfaces are logged to the
event log as protocol events.
* Note: Enabling the protocol event log may cause the event log
to be rapidly filled with protocol events.
You can Configure the protocol event log using either the Web
Agent or the CLI.
Using the Web
Agent
To Configure the protocol event log using the Web Agent:
1. Select General Events from the Events group on the Web
Agent window. The General Event Management dialog
box opens (Figure 6-162).