Using the cli – Avaya P580 User Manual
Page 266
7-8
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Figure 6-20. Switch Fabric Status Dialog Box
Using the CLI
To enable the redundant hardware by using the CLI, enter the
following command from Enable/Configure mode:
hardware enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
This manual is related to the following products: