Avaya P580 - Manual (Page 673)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 -27
80-Series QoS
Examples:
Standard ACL
Rules
Table 6-151. Examples: Standard ACL Rules
To . . . Enter . . .
• Use the DSCP in the packet to
classify all traffic that has a
source IP address in the 10.10.60
subnet.
• Mask the three least significant
bits of the DSCP.
access-list MyAccessList1 4
permit use-diffserv mask
10.10.60.0 0.0.0.255
Assign a priority of 7 to all traffic
that has a source IP address in the
10.10.70 subnet. access-list MyAccessList1 5
permit use-priority 7 10.10.70.0
0.0.0.255
• Replace the existing DSCP with a
DSCP of 5 for all traffic that has a
source IP address in the 10.10.80
subnet.
• Mask the three least significant
bits of the DSCP
access-list MyAccessList1 6
permit remark-diffserv 5 mask
10.10.80.0 0.0.0.255
Use the layer 2 priority of the
packet to classify all traffic that has
a source address in the 11.11.11
subnet access-list MyAccessList1 7
permit use-l2 11.11.11.0
0.0.0.255
Use the DSCP in the packet to
classify all traffic that has a source
IP address of 199.93.239.168 access-list MyAccessList1 8
permit use-diffserv host
199.93.239.168
• Use the DSCP in the packet to
classify all traffic that has a
source IP address of 3.3.3.3
• Mask the three least significant
bits of the DSCP
access-list MyAccessList1 9
permit use-diffserv mask host
3.3.3.3
Assign a priority of 2 to all traffic
that has a source IP address of
1.1.1.1 access-list MyAccessList1 10
permit use-priority 2 1.1.1.1
Block all traffic that has a source IP
address of 10.1.0.55 access-list MyAccessList1 11
deny 10.1.0.55