Avaya P580 - Manual (Page 557)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-15
Managing Intelligent Multicasting
5. Click DELETE to remove your selected multicast session
client port, or CANCEL to restore previous settings.
* Note: Static (Mgmt) client ports can only be removed through
the Static Sessions dialog box.
Using the CLI
To delete a multicast session client port using the CLI, enter the
following command from Configure mode:
# clear intelligent-multicast client-
port port
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Creating a Static Multicast Session
You can create a static multicast session using either the Web Agent
or the CLI.
Using the Web
Agent
To create a new static multicast session using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 16-7).
* Note: You must enable intelligent multicasting on a
global basis to make your static multicast session
active. See "Configuring Global Intelligent
Multicasting", earlier in this chapter.
Figure 6-150. Static Multicast Session Dialog Box
2. Select Create to create a new session. The Static Multicast
Session Configuration dialog box opens (Figure 16-8).