Enabling vrrp on an interface, Enabling vrrp on an interface -94, Cli commands – Avaya P580 User Manual
Page 380
9-94
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Figure 6-61. IP Global Configuration Dialog Box
2. Select Enable from the VRRP field pull-down menu.
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
CLI Commands
To globally enable VRRP from the CLI, enter the following
command in Configure mode:
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Enabling VRRP on an Interface
VRRP can be enabled on an interface using the Web Agent or the
CLI.
This manual is related to the following products: