Avaya P580 - Manual (Page 621)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 19-9
Analyzing Network Performance By Using RMON and Ethernet Statistics
Setting Up a Port Mirror on a Switch in Fabric Mode 1
You can set up a port mirror on a switch in Fabric Mode 1 by using
either the Web Agent, the CLI, or SNMP. Fabric mode 1 port
mirroring works with 50-series modules.
* Notes: Do not use a router port as a piggyback port.
Do not set port mirroring on disabled ports.
You must establish a link to a mirror port before you
setup a port mirror with a piggyback port. Otherwise,
the port mirror will not work.
To set up a port mirror on a switch in Fabric mode 1 by using the
Web Agent:
1. Select Sampling from the Port Mirroring group on the Web
Agent window. The Port Mirroring Information Web page
opens (Figure 6-176).
Figure 6-176. Port Mirroring Information Web Page
2. Refer to Table 2 for an explanation of the fields on the Port
Mirroring Information Web page.
Table 6-121. Port Mirroring Information Web Page Parameters
Parameter Definition
Configure Source Select the configuration source port. Provides a link to the
Port Mirroring Configuration Web page.
Source Port Displays the port under investigation.
1 of 2