Avaya P580 - Manual (Page 291)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 9-5
Configuring IP Routing
2. To modify an IP interface first click on Select, to select the
specific interface, modify the parameter(s), and then click on
APPLY or CANCEL to restore previous settings.
* Note: If you modify the ARP Timeout value, the new value
does not take affect when you click on APPLY.You
must, in addition to changing the ARP Timeout
value, change the Admin State to Down, then
change the ARP Timeout value, and then change the
Admin state back to Up for that Interface.
This procedure can be done when you change the
ARP Timeout value. If not already selected, select
Interfaces from the Routing > IP > Configuration
group on the Web Agent window. The IP Interfaces
dialog box opens (Figure 6-26-).
Click on the Select checkbox for the Interface,
change the Admin State to Down, then click on
APPLY. Again select the interface, enter the new
value of the ARP Timeout period, and change the
Admin State parameter to UP, then click on APPLY.
3. To delete an IP interface first click on Select, to select the
specific interface then click on DELETE.
4. Refer to Table 6-14 for an explanation of the IP Interfaces
dialog box parameters.