Avaya P580 - Manual (Page 472)

12-16 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Figure 6-102. IPX Static Services Dialog Box
CLI Command
To create IPX static services using the CLI, enter the following
command in Configure mode:
# ipx service
|range>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Deleting IPX Static Service
You can delete an IPX static service using either the Web Agent or
the CLI.
Web Agent
Procedure
To delete an IPX static service using the Web Agent:
1. Select Static Services from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Services dialog box opens (see Figure 6-100).
2. Select the checkbox for the IPX Static Service that you want
to remove.
3. Click DELETE to remove the IPX static service, or CANCEL
to keep the IPX Static Service.
CLI Command
To delete an IPX static service using the CLI, enter the following
command in Configuration mode:
(configure)# clear ipx service {
|*}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.