Cli commands – Avaya P580 User Manual

Page 215

Text mode
Original mode

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

5-35

Configuring Port Parameters

Figure 6. Switch Port Configuration Web page

CLI Commands

Use the following command to enable Auto Flush on link down:

set port auto-flush <module-number>/<mod-swport-range>
enable

Use the following command to disable Auto Flush on link down:

set port auto-flush <module-number>/<mod-swport-range>
disable

* Note: You must be in Global Configuration mode to enter the

set port auto-flush commands.

For more information about these commands, see Chapter 19,
“Port,” in the Command Reference Guide for the Avaya P550R, P580,
P880, and P882 Multiservice Switches, Version 5.3.1

This manual is related to the following products:

P550R