Avaya P580 - Manual (Page 218)

5-38 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
4. Select one of the following items listed at the bottom of the
screen for more information about the switch ports:
— Next/Previous Module – Displays the next or previous
module’s switch port parameters.
— Modules – Returns you to the Module Information
window.
— All Module Switch Ports Configuration – Opens the
Switch Port Configuration All Ports window and
configures all ports for the selected module.
CLI Command
To view switch port parameters using the CLI, enter the following
command from Priv mode:
> show port [{|}
[...,{|}]]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for more details about this
command.
GBIC Identification
The GBIC Identification feature identifies the type of GBICs that are
installed in 80-series gigabit modules with GBIC interfaces. The
feature identifies the following types of connectors:
■
GBIC SX (short wavelength)
■
GBIC LX (long wavelength)
■
GBIC LX/LH (long wavelength/long haul)
If any nonstandard connectors are present, the feature identifies
them as GBIC LX/LH. You can view this information by using the
Web Agent, CLI, or SNMP.
Web Agent
Procedure
To use the Web Agent to view the type of GBICs that are connected
to the modules in your switch, open the Physical Port Configuration
Web page. The type of GBIC that is connected to each port is
displayed in the Connector field on this Web page.
To open the Physical Port Configuration Web page:
1. Expand the Modules & Ports folders.