Allied Telesis AT-S95 CLI - Manual (Page 91)

DHCP Snooping Commands
Page 79
User Guidelines
After entering this command an entry is added to the DHCP snooping database. If DHCP snooping binding file
exists, the entry is added to that file also.
The entry is displayed in the show commands as a ‘DHCP Snooping entry’.
Example
The following example configures the DHCP snooping binding database and adds binding entries to the database.
clear ip dhcp snooping database
The clear ip dhcp snooping database Privileged EXEC mode command clears the DHCP binding database.
Syntax
clear ip dhcp snooping database
Parameters
This command has no arguments or keywords.
Default Configuration
No static binding exists
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the DHCP binding database.
show ip dhcp snooping
The show ip dhcp snooping EXEC mode command displays the DHCP snooping configuration.
Syntax
show ip dhcp snooping [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Specify Ethernet port
• port-channel-number — Specify Port-channel number
Default Configuration
This command has no default configuration.
Console# ip dhcp snooping binding 0060.704c.73ff 3 10.1.8.1 ethernet 1/g21
Console# clear ip dhcp snooping database